The Problem
The Solution-IntelEyeSight
Nsight Analyst / Nsight Inspector
Custom Modules
In-Circuit Test
Boundary Scan
In-System Programming
System
Automated Test Equipment
Problem
Integrated strategies have been around for some time, but to integrate two or more test methods, one of the test methods may need to sacrifice a crucial test and replace the test with something narrow in scope due to this test may not be able to execute efficiently on the hardware system it is being executed on because of the restrictive specifications of the hardware system or the programming environment is not compatible for the test that is doing the execution.
To give you an example, the OEM is told that their functional test can be integrated into an in-circuit test. One of the tests for functional is a high-frequency signal from a voltage-controlled oscillator outside of the measuring capability of the in-circuit test system but this signal has a DC component. Therefore, to compromise, the high frequency is not measured but only the DC component is measured. This verifies something is measurable for this test. This means the loss of a crucial test for a crucial signal because of the test system’s restrictive capabilities.
Due to the restrictive specifications of the hardware system or the programming environment not being compatible, this could result in numerous limited scope tests due to the complexity of the board being tested resulting in a board with reduced test coverage. Another thought this reduced test coverage could be lower because of integrating the two test methods with restrictive hardware for tests or an incompatible programming environment.
The-Solution
To resolve this issue, IntelEyeSight became the solution. IntelEyeSight is an Intelligent Integrated Test System capable of communicating across multiple hardware systems and programming environments.
This allows both the Intelligent Integrated Test System and the Test Development System the ability to optimize each multiple test methodologies to integrate into each other’s test environment with no restriction on hardware specifications or program compatibility resulting in no narrow scope in the test.
So, any standalone RF, Microwave, ATE (Automated Test Equipment) Engineering Verification Testing, Design Verification Testing or Production Verification Testing / Functional Testing/Processor Emulation/Simulation/Self Diagnostics/Instrumentation/PXI or any x86 supported test can be integrated into this test system as is with no need to compromise on how the test methodology was executed, developed, or originally designed for testingFurthermore, IntelEyeSight can optimize each test methodology, by allowing any test in one test methodology to complement the other tests in any other test methodology in areas where reduce test coverage in any other test method can be increased.
The resulting benefits of the IntelEyeSight Test System are increased test coverage, a higher level of test methodology integration, removal of manufacturing process steps related to the need for multiple test processes to increase test coverage of the circuit board, and the ability to use any test and measurement tool to include but not limited to OEMs and component manufacturer’s development tools for programming, test development, measurement, and test then integrate these tools into IntelEyeSight Test System as-is with no compromise in function.
We offer this solution on the Teradyne / Genrad Test Development System and the Agilent / Keysight Test Development System.
NSight-Analyst
OEMs have always wanted to be more proactive in manufacturing their products. Sometimes our projects may not be receiving the attention we feel the project deserves. In addition, this does not provide much support to the OEM to verify reliable products. To resolve this issue Nsight Analyst was created. Using the Teradyne / Genrad system data, Nsight Analyst, analyzes to determine history, modes, errors, failure modes, and other pertinent details.
In addition to these benefits, Nsight Inspector is a software option of Nsight Analyst that allows the OEM to monitor incoming material after finished goods that are in transport to the OEMs inventory to verify the product is in conformance with accurate testing and reliability.
With Nsight Analyst and Nsight Inspector, the OEM can monitor their product in the Contract Manufacturer’s facility and monitor product reaching the OEM’s facility. The OEM now has the tools needed to be more proactive in their effort to assist in manufacturing their PCBAs.
Custom-Modules
To assist in the quality assurance effort of a proactive approach in monitoring projects at the Contract Manufacturer, TestEye Technologies Inc. will develop your project a custom module option in Nsight Analyst / Nsight Inspector. This option allows us to develop a module for your specific test so you will be able to monitor your test system at the Contract Manufacturer and take a proactive approach in your project’s developmentYou will be able to determine history, modes, errors, failure modes, and other pertinent details.In addition, your custom module will be able to monitor incoming material after finished goods that are in transport to the OEMs inventory to verify the product is in conformance with accurate testing and reliability.With the custom module, the OEM will be able to monitor their product in the Contract Manufacturer’s facility and monitor product reaching the OEM’s facility.
If standalone test systems are a viable choice for testing. TestEye Technologies Inc. offers a variety of standalone test systems.
In addition, we have bundled our standalone test packages with our Nsight Analyst / Inspector Application and provide stable guaranteed use with our Manufacturing Contract. We offer standalone solutions to satisfy our customer’s needs.
Free Installation charge (Just pay for the trip)We offer standalone solutions to satisfy our customer’s needs
In-Circuit
If high fault coverage for manufacturing defects with comprehensive component testing is your choice. Then In-Circuit Testing will provide a highly reliable and comprehensive testing method as compared to other testing methods. We offer In-Circuit Test for the Teradyne / Genrad Test Development System and the Agilent / Keysight Test Development System
Boundary
Boundary-scan testing is a cost-effective testing technique that relies on industry-standard, IEEE 1149.1 1149.6 for PCBAs with limited access to components pins and board-level circuitry.We offer standalone Boundary scan testing using the industry standard from JTAG Technologies Inc.
In-System
In-System Programming is an essential foundation in any application development and is an integral part of the application hardware considering hardware software is always evolving to accommodate changes in the system hardware. In-System programming enhances or extends the functions of any system.
If you are considering the use and cost of in-system programming compared to mass programming components, Test Technologies Inc. offers mass programming of components as well as in-system programming of all your needed components. Taking into consideration the time to program components TestEye Technologies looks at a cost-effective strategy for our customers to improve efficiency in programming and reduce costs of the PCBA. TestEye Technologies Inc. uses Avnet or Arrow Electronics for your mass programming needs.
TestEye Technologies Inc. develops in-system programming to accommodate your programming needsWe can program the simplest to the most complex of components.
TestEye Technologies ATE and IntelEyeSight Systems ensure PCBAs perform and function as intended once they’re in the customer’s hands, which assists in the effort of preventing defective or faulty devices from entering the market.
TestEye Systems are integrated solutions that are able to test embedded systems earlier in the design cycle, encapsulating building the test design from the beginning understanding of the embedded software.
TestEye Systems are integrated solutions that are able to test complicated systems containing dozens of complex test instruments (real or simulated electronic test equipment)
TestEye Systems are integrated solutions that are able to test software applications for RF Test, Wireless, 5G, Digital, Analog, and Mixed Signal
TestEye Systems integrated solutions are bundled with our Nsight Application to allow OEMs more proactive control of the manufacturing process of their PCBAs by generating real-time test data and quality data from the production floor.
TestEye Systems are integrated solutions that can be fitted to any industry (Medical Devices, Aerospace, Telecommunications, Industrial, Agricultural, Automobile, Consumer, Computer, Network, Power, High Voltage Internet Of Things (IOT), ETC…)
TestEye Systems are integrated solutions that can create your Engineering Verification Test or Design Verification Test into your Production Test
TestEye Systems are integrated solutions that can create your Engineering Verification Test or Design Verification Test
TestEye Systems are integrated solutions that can fully integrate Systems, Embedded Software, Application, Test Instrumentation, with manufacturing test methods on an Teradyne/Genrad or Agilent 3070/Keysight 3070 test development system without compromising the original test designs for the PCBA
Automated
If a Rack and Stack system whether Electronic /Digital / RF / Microwave / Wireless / or otherwise is what you require or a rack and stack system that is integrated into the in-circuit test system.
Let TestEye Technologies Inc. develop your automated test equipment (ATE) test system.
TestEye Technologies Inc. will develop a system to reduce the amount of test time needed to verify unit under test works and will quickly find faults in your unit under test.
